Academics - Certification

The School of Mechanical and Materials Engineering

Academics - Certification

Interdisciplinary Excellence Built On World-Class Knowledge

At Washington State University students must declare a major to continue into upper-division courses, most MME 300 and 400 level courses require a declared engineering major.

Academic Regulations

53. CERTIFICATION OF A MAJOR

Upon completion of 24 semester hours, and meeting department, program, or school certification requirements, a student may certify in an academic major with the approval of the appropriate academic department, program, or school, and upon notification to the Student Advising and Learning Center. Departments, programs, or schools may require additional criteria beyond the minimum 24 hours for certification and a grade point average higher than the minimum of 2.00. Typically, students with 60 or more semester hours should be certified into a major. Consult the catalog for specific certification requirements.

ME Requirements

  1. The School of Mechanical and Materials Engineering will establish the total number of students (fall plus spring) to be certified into the mechanical engineering program for the year.
  2. Students should apply for certification in the semester after they have completed the following seven courses: Math 171, Math 172, Chem 105, Phys 201, ME 103 (116), CE 211 and Engl 101. Students must have a minimum 2.0 cum gpa and a C or better grade for each of the seven courses listed above to be considered for certification.
  3. Students need to submit an application for certification prior to September 25th or February 15th to the Undergraduate Student Services office. The applications need to be submitted to Sloan 205 or electronically to newcoug@mme.wsu.edu. The application forms are available in the Student Service Office located in Sloan 205 or from the following website, http://cougs.mme.wsu.edu/notes/me_cert_inst.html.
  4. Students who have a minimum g.p.a. of 2.7 in both their cumulative g.p.a. and the average of the following five courses: Math 171, Math 172, Chem 105, Phys 201, CE 211 may be accepted at the time of application. Other applications will be held until the September 25th or February 15th deadlines.
  5. The applicants will be ranked using the following criteria:
    1. average g.p.a of the following courses listed in item 2: Math 171, Math 172, Chem 105, Phys 201, CE 211;
    2. average g.p.a. of all the engineering/math/science courses that are required for ME and have been completed;
    3. current semester's g.p.a.. Only final grades will be used in this ranking, but repeated grades will be noted.
    For the borderline cases, the applicants’ extended work experience, training or skills (equivalent to more than two years of full-time employment) which indicate a career commitment may be considered.
  6. Students who are deficient under the University's Educational Policies & Procedures are subject to decertification. The undergraduate studies committee will determine the eligibility and probation conditions for decertified students who will be permitted to apply for recertification.
  7. Any further questions should be addressed to the Student Service Office located in Sloan 205 or newcoug@mme.wsu.edu

MSE Requirments

  1. The School of Mechanical and Materials Engineering will establish the total number of students (to be certified into the materials science engineering program for the year).
  2. Students should notify their MSE advisor when they complete the following six courses: Math 171, Math 172, Chem 105, Chem 106, Phys 201, and Engl 101.
  3. The applicants will be selected for certification using the following criteria: (a) average g.p.a in the seven courses stated in item 2; (b) overall g.p.a; (c) current semester's g.p.a.; (d) transfer g.p.a, if available. Only final grades will be used in this ranking, but repeated grades will be noted.
  4. The following additional information will be considered in the selection of the last 20% of available spaces: (a) grades in additional engineering, science or mathematics courses; (b) pattern of repeat grades; (c) work experience; (d) statement of interest in materials science and engineering.
  5. Transfer students will be considered using the same criteria and additional considerations as Washington State University students.
  6. Students with a less than 2.00 overall g.p.a. or average g.p.a. of the courses listed in item 2 will not be certified except in rare cases as shown in 9
  7. Students who are deficient under the University's Educational policies & Procedures, Rules 37, 38, and 39 are subject to decertification. The undergraduate studies committee will determine the eligibility and probation conditions for decertified students to request reconsideration for recertification. In general, students who are deficient for two consecutive semesters will not be recertified.
    Rules 37 through 40 - WSU Educational Policies and Procedures.
    1. An undergraduate student who has a cumulative grade point average of 2.00 or higher but whose grade point average in each of the last two consecutive semesters is below 2.00 will be deficient and must apply to the Office of Academic Standing for reinstatement. Certified majors must have the permission of their major departments to retain certification. Students decertified under this rule will be permitted to enroll in courses normally reserved for certified majors during the next semester of their enrollment. In cases of repeat enrollments, Rule 34 applies. (Faculty Senate 5/17/84)
    2. An undergraduate who at the end of any semester has failed to maintain a 2.00 cumulative grade point average will be dropped and must have the permission of the Academic Standing to re-enroll. A certified major who at the end of any semester has failed to maintain a 2.00 cumulative grade point average in major courses may be dropped (decertified) from the major. (See Rule 56) (Faculty Senate 2/23/78)
    3. An undergraduate student who at the end of two consecutive semesters has failed to maintain a 2.00 cumulative grade point average will normally not be reinstated.
    4. Appeals will be considered only when there are unusual extenuating circumstances and must be submitted in writing to Academic Standing.
  8. Decertified students who are eligible for recertification may request to be recertified after they fulfill their probation conditions.
  9. Additional Criteria that may be considered for students who do not meet the minimum g.p.a. and would like to appeal to be certified or re-certified are:
    1. Extended work experience, training or skills (equivalent to more than two years of full-time employment) which indicate a career commitment. Summer and part-time work will normally not be considered.
    2. Academic problems due to inadequate preparation, obligations, or personal misfortune, which are no longer likely to affect the student's performance.
    3. Academic hardships due to delay in certification, if no alternative exists.

Petitions for consideration of additional criteria should be addressed to the School Director. They should be accompanied by documentation from doctors, employers, instructors, or other professionals when necessary to establish personal/academic experiences or problems. The Undergraduate Studies Committee will meet at least once each semester to make the final decision on these petitions.

Students in MSE lab examine materials Students in MSE lab examine materials

Follow this link to view all the "sidebars", like the one above, that you may see in this area of our web pages. Each "sidebar" has an interesting detail about the School of Mechanical and Materials Engineering.

US News and World Report Ranking:
America's Best Graduate Schools Ranked in 2008;
MSE 41
ME 56
ASEE Top 50 ME programs
Washington State University - 50
School of Mechanical and Materials Engineering, PO Box 642920, Washington State University, Pullman WA 99164-2920, 509-335-8654, Contact Us