Washington State University

Amir Ameli - Assistant Professor

The School of Mechanical and Materials Engineering

Amir Ameli - Assistant Professor

Interdisciplinary Excellence Built On World-Class Knowledge

portrait
Amir Ameli

Contact Information:

office West 130 Tri-Cities
telephone 509 372 7442
e-mail a.ameli@tricity.wsu.edu
Postal mail Amir Ameli
Washington State University - Tri-Cities
2710 Crimson Way
Richland, WA 99354-1671

Joined MME in 2015;
Ph.D. in Mechanical Engineering, University of Toronto, Canada, 2011

Research Interests:

  • Multifunctional polymer composites: processing and characterization
  • Additive manufacturing of polymer nanocomposites
  • Mechanics of additively manufactured materials
  • Nano/micro-structured materials for fuel cells, batteries, and supercapacitors
  • Smart materials and devices for sensors and actuators
  • Green composites for biomedical applications and environmental sustainability
  • Advanced cellular composites for electromagnetic, thermal, and acoustic insulation

Teaching Interests:

  • Solid Mechanics
  • Manufacturing
  • Machine Design
  • Experimental Design
  • Statics and Dynamics
  • Mechanics of Materials
  • Polymer Composites and Nanocomposites

Recent Publications:

  • (Featured on Cover Page) M. Arjmand, A. Ameli, U.-T. Sundararaj; Employing nitrogen doping as innovative technique to improve broadband dielectric properties of carbon nanotube/polymer nanocomposites, Macromolecular Materials and Engineering (1-Year Impact Factor, IF:2.78), doi: 10.1002/mame.201500365
  • A.R. Kakroodi, Y. Kazemi, W. Ding, A. Ameli, C.B. Park; Poly(lactic acid)-based in situ microfibrillar composites with enhanced crystallization kinetics, mechanical properties, rheological behavior, and foaming ability, Biomacromolecules (IF:5.75), Article ASAP, November 4, 2015, doi: 10.1021/acs.biomac.5b01253
  • M. Nofar, A. Ameli and C.B. Park; A novel technology to manufacture biodegradable polylactide bead foam products, Materials and Design (IF:3.50), 2015; 83:413-421, doi: 10.1016/j.matdes.2015.06.052
  • M. Nofar, A. Ameli and C.B. Park; Development of polylactide bead foams with double crystal melting peaks, Polymer (IF:3.56), 2015; 69: 83-94, doi: 10.1016/j.polymer.2015.05.048
  • A. Ameli, S. Wang, Y. Kazemi, C.B. Park and P. PŲtschke, A facile method to increase the charge storage capability of polymer nanocomposites, Nano Energy (IF:10.33), 2015; 15: 54-65, doi: 10.1016/j.nanoen.2015.04.004
  • A. Ameli, M. Nofar, D. Jahani and C.B. Park; Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming properties, Chemical Engineering Journal (IF:4.3), 2015; 262: 78-87, doi: 10.1016/j.cej.2014.09.087
  • (Featured on Back Cover) D. Jahani, A. Ameli, M. Saniei, W. Ding, C.B. Park and H. Naguib; Characterization of the structure, acoustic property, thermal conductivity, and mechanical property of highly expanded open-cell polycarbonate foams, Macromolecular Materials and Engineering (IF:2.78), 2015; 300: 48-56, doi: 10.1002/mame.201400125
  • A. Ameli, M. Nofar, S. Wang and C.B. Park; Lightweight polypropylene/stainless-steel fiber composite foams with low percolation for efficient electromagnetic interference shielding, ACS Applied Materials and Interfaces (IF:6.72), 2014; 6(14): 11091-11100, doi: 10.1021/am500445g
  • A. Ameli, M. Nofar, C.B. Park, P. PŲtschke and G. Rizvi; Polypropylene/carbon nanotube nano/microcellular structures with high dielectric permittivity, low dielectric loss, and low percolation threshold, Carbon (IF:6.20), 2014; 71: 206-217, doi: 10.1016/j.carbon.2014.01.031
  • A. Ameli, D. Jahani, M. Nofar, P.U. Jung and C.B. Park; Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties, Composites Science and Technology (IF:3.57) 2014; 60: 88-95, doi: 10.1016/j.compscitech.2013.10.019
  • S.H. Mahmood, A. Ameli, N. Hossieny and C.B. Park; The interfacial tension of molten polylactide in supercritical carbon dioxide, Chemical Thermodynamics (IF:2.68), 2014; 65: 69-76, doi: 10.1016/j.jct.2014.02.017
  • M. Nofar, A. Ameli, and C.B. Park; The thermal behavior of polylactide with different D-lactide content in the presence of dissolved CO2, Macromolecular Materials and Engineering (IF:2.78) 2014; 299 (10): 1232-1239 doi: 10.1002/mame.201300474
  • D. Jahani, A. Ameli, P.U. Jung, M.R. Barzegari, C.B. Park and H. Naguib; Open-cell cavity-integrated injection-molded acoustic polypropylene foams, Materials and Design (IF:3.50), 2014; 53: 20-28, doi: 10.1016/j.matdes.2013.06.063
  • M. Nofar, A. Tabatabaei, A. Ameli and C.B. Park; Comparison of melting and crystallization behaviors of polylactide under high-pressure CO2, N2, and He, Polymer (IF:3.56), 2013; 54: 6471-6478, doi: 10.1016/j.polymer.2013.09.044
  • A. Ameli, P.U. Jung and C.B. Park; Electrical properties and electromagnetic interference shielding effectiveness of polypropylene/carbon fiber composite foams, Carbon (IF:6.20) 2013; 60: 379-391, doi:10.1016/j.carbon.2013.04.050
  • N. Hossieny, A. Ameli and C.B. Park; Characterization of expanded polypropylene bead foams with modified steam-chest molding, Industrial and Engineering Chemistry Research (IF:2.59), 2013; 52: 8236Ė8247, doi: 10.1021/ie400734j
  • A. Ameli, P.U. Jung and C.B. Park; Through-plane electrical conductivity of injection-molded polypropylene/carbon fiber composite foams, Composites Science and Technology (IF:3.57), 2013; 76: 37-44, doi: 10.1016/j.compscitech.2012.12.008
  • A. Ameli, D. Jahani, M. Nofar, P.U. Jung and C.B. Park; Processing and characterization of solid and foamed injection-molded polylactide with talc, Cellular Plastics (IF:1.66), 2013; 49: 351-374, doi: 10.1177/0021955X13481993
  • G. Jhin, S. Azari, A. Ameli, N.V. Datla, M. Papini and J.K. Spelt; Crack growth rate and crack path in adhesively bonded joints: Comparison of creep, fatigue and fracture, Adhesion and Adhesives (IF:1.77) 2013; 46: 74-84, doi: 10.1016/j.ijadhadh.2013.05.009
  • S. Azari, A. Ameli, M. Papini and J.K. Spelt; Adherend thickness influence on fatigue behavior and fatigue failure prediction of adhesively bonded joints, Composites A: Applied Science and Manufacturing (IF:3.07), 2013; 48: 181-191, doi: 10.1016/j.compositesa.2013.01.020

Publications listed at Google Scholar:

First 100 Titles in date order
List format:
 Title (Link to document)
 Authors
 Source Publication
Cited by Year
Process-microstructure-electrical conductivity relationships in injection-molded polypropylene/carbon nanotube nanocomposite foams
A Ameli, Y Kazemi, S Wang, CB Park, P Pötschke
Composites Part A: Applied Science and Manufacturing 96, 28-36 , 2017
  2017
Characterization of hard-segment crystalline phase of thermoplastic polyurethane in the presence of butane and glycerol monosterate and its impact on mechanical property and microcellular morphology
N Hossieny, V Shaayegan, A Ameli, M Saniei, CB Park
Polymer 112, 208-218 , 2017
1 2017
Predicting environmental degradation of adhesive joints using a cohesive zone finite element model based on accelerated fracture tests
OR Patil, A Ameli, NV Datla
International Journal of Adhesion and Adhesives , 2017
  2017
Blended powder semisolid forming of Al7075/Al 2 O 3 composites: Investigation of microstructure and mechanical properties
A Javdani, V Pouyafar, A Ameli, AA Volinsky
Materials & Design 109, 57-67 , 2016
  2016
Conductive filler/polymer composite foams as high performance dielectrics and EMI shields
A Ameli, CB Park
1st International Conference of Molecular Engineering of Polymers, Shanghai ... , 2016
  2016
Fracture toughness of fused deposition modeled thermoplastics
N Aliheidari, J Christ, R Tripuraneni, A Ameli, S Nadimpalli
53rd Annual Technical Meeting of the Society of Engineering Science, Maryland, , 2016
  2016
Effects of synthesis catalyst and temperature on broadband dielectric properties of nitrogen-doped carbon nanotube/polyvinylidene fluoride nanocomposites
A Ameli, M Arjmand, P Pötschke, B Krause, U Sundararaj
Carbon 106, 260-278 , 2016
4 2016
Experimental observation and modeling of fiber rotation and translation during foam injection molding of polymer composites
V Shaayegan, A Ameli, S Wang, CB Park
Composites Part A: Applied Science and Manufacturing 88, 67-74 , 2016
1 2016
Modelling of multi-cell growth effect on fiber location and translation
S Wang, A Ameli, V Shaayegan, C Wang, CB Park, H Naguib
FOAMS¬ģ 2016, Seattle, Washington , 2016
  2016
Electrical conductivity and crystallization behavior of polypropylene in the presence of supercritical carbon dioxide and multiwalled carbon nanotubes
Y Kazemi, AR Kakroodi, S Wang, A Ameli, T Filleter, CB Park
32nd International Conference of the Polymer Processing Society, PPS-32 ... , 2016
  2016
Investigation of fiber orientation and displacement in high-pressure foam injection molding of polystyrene/carbon-fiber composites
V Shaayegan, L Cuif, A Ameli, S Wang, CB Park
32nd International Conference of the Polymer Processing Society, PPS-32 ... , 2016
  2016
The effects of morphological manipulations on the characteristics of polylactic acid (PLA)/nanofibrillar nylon-6 blends
AR Kakroodi, Y Kazemi, W Ding, A Ameli, CB Park
32nd International Conference of the Polymer Processing Society, PPS-32 ... , 2016
  2016
Measuring the interlayer fracture resistance of FDM printed thermoplastics
N Aliheidari, J Christ, R Tripuraneni, A Ameli, S Nadimpalli
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC ... , 2016
  2016
Impact of foaming on fiber breakage, conductivity, and EMI shielding of injection-molded polypropylene/stainless steel fiber composites
A Ameli, S Wang, Y Kazemi, CB Park
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC ... , 2016
  2016
Effect of void fraction on dielectric properties of injection-molded polypropylene/MWCNT foams
A Ameli, S Wang, Y Kazemi, CB Park, P Pötschke
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC ... , 2016
  2016
Foaming effects on the percolation threshold in conductive polymer composites: A systematic analysis
S Wang, A Ameli, Y Kazemi, V Shaayegan, CB Park, HE Naguib
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC ... , 2016
  2016
Macromol. Mater. Eng. 5/2016
M Arjmand, A Ameli, U Sundararaj
Macromolecular Materials and Engineering 301 (5), 640-640 , 2016
  2016
Foam injection molding of polypropylene/stainless steel fiber composites for efficient EMI shielding
A Ameli, M Nofar, M Saniei, S Wang, CB Park
AIP Conference Proceedings 1713 (1), 100005 , 2016
  2016
Environmental degradation prediction in adhesive joints using a cohesive zone model and data from open-faced specimens
N Datla, A Ameli
Adhesion Society Annual Meeting, San Antonio, Texas , 2016
  2016
Employing nitrogen doping as innovative technique to improve broadband dielectric properties of carbon nanotube/polymer nanocomposites
M Arjmand, A Ameli, U Sundararaj
Macromolecular Materials and Engineering , 2016
7 2016
Effects of uniaxial and biaxial orientation on fiber percolation in conductive polymer composites
E Chang, A Ameli, LH Mark, CB Park
AIP Conference Proceedings 1695 (1), 020027 , 2015
1 2015
Visualization of carbon fiber orientations in polymer composite foams
V Shaayegan, L Cuif, A Ameli, CB Park
Poly-Foam 2015, Shanghai, China , 2015
  2015
Poly (lactic acid)-based in situ microfibrillar composites with enhanced crystallization kinetics, mechanical properties, rheological behavior, and foaming ability
AR Kakroodi, Y Kazemi, WD Ding, A Ameli, CB Park
Biomacromolecules 16 (12), 3925-3935 , 2015
18 2015
A novel technology to manufacture biodegradable polylactide bead foam products
M Nofar, A Ameli, CB Park
Materials & Design 83, 413-421 , 2015
17 2015
A facile method to increase the charge storage capability of polymer nanocomposites
A Ameli, S Wang, Y Kazemi, CB Park, P Pötschke
Nano Energy 15, 54-65 , 2015
18 2015
Development of polylactide bead foams with double crystal melting peaks
M Nofar, A Ameli, CB Park
Polymer 69, 83-94 , 2015
23 2015
Enhancing electrical and dielectric properties of functional polymer nanocomposites via foam injection molding
A Ameli, Y Kazemi, S Wang, CB Park, P Pötschke
ASME Applied Mechanics and Materials Conference, Seattle, Washington, Paper ... , 2015
  2015
Rheology and crystallization behavior of supercritical CO2 saturated polypropylene-multiwalled carbon nanotube composites
Y Kazemi, A Ameli, N Hossieny, S Wang, CB Park, P Pötschke
ASME Applied Mechanics and Materials Conference, Seattle, Washington, Paper ... , 2015
  2015
Uniaxial strain effects on the fiber percolation in polymer composites
E Chang, A Ameli, LH Mark, CB Park
ASME Applied Mechanics and Materials Conference,Seattle, Washington, Paper ... , 2015
  2015
Electrical and dielectric properties of foam injection-molded polypropylene/multiwalled carbon nanotube composites
A Ameli, M Nofar, M Saniei, N Hossieny, CB Park, P Pötschke
AIP Conference Proceedings 1664 (1), 110002 , 2015
  2015
Expanded polylactide bead foaming-A new technology
M Nofar, A Ameli, CB Park
AIP Conference Proceedings 1664 (1), 040002 , 2015
  2015
Effect of process parameters on electrical conductivity of injection-molded polypropylene/MWCNT foams
A Ameli, S Wang, Y Kazemi, CB Park, P Pötschke
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC ... , 2015
  2015
Visualization of cell-growth induced fiber orientation in polymer composite foams
A Ameli, V Shaayegan, CB Park
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC ... , 2015
  2015
Phase morphology and electrical conductivity of polypropylene/polylactic acid blends filled with multi-walled carbon nanotubes
Y Kazemi, S Wang, A Ameli, KJ Yu, CB Park
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC ... , 2015
  2015
Uniaxial strain effects on the percolation threshold of fibers in polymer composites: A Monte Carlo simulation
E Chang, A Ameli, LH Mark, CB Park
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC,Orlando ... , 2015
  2015
The effect of matrix viscosity and compounding parameters on the morphology and electrical conductivity of PP-CNT/PS blends
KJ Yu, A Ameli, Y Kazemi, S Wang, CB Park
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC,Orlando ... , 2015
  2015
From nano-structured iPP formation to nano-cellular iPP foam
M Saniei, A Ameli, MP Tran, CB Park
Society of Plastics Engineers Annual Technical Conference, SPE-ANTEC ... , 2015
  2015
Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors
A Ameli, M Nofar, D Jahani, G Rizvi, CB Park
Chemical Engineering Journal 262, 78-87 , 2015
33 2015
Back Cover: Macromol. Mater. Eng. 1/2015
D Jahani, A Ameli, M Saniei, W Ding, CB Park, HE Naguib
Macromolecular Materials and Engineering 300 (1), 128-128 , 2015
  2015
Characterization of the Structure, Acoustic Property, Thermal Conductivity, and Mechanical Property of Highly Expanded Open‚ÄźCell Polycarbonate Foams
D Jahani, A Ameli, M Saniei, W Ding, CB Park, HE Naguib
Macromolecular Materials and Engineering 300 (1), 48-56 , 2015
14 2015
Decoupling the effects of foaming parameters on the electrical conductivity and percolation threshold in polymer composite foams
S Wang, A Ameli, CB Park
Poly-Foam 2014, Shanghai, China , 2014
  2014
Processing and characterization of injection-molded polypropylene-MWCNT nanocomposite foams
A Ameli, S Wang, CB Park, P Pötschke
Polymer Foam 2014, Cologne, Germany , 2014
  2014
The Thermal Behavior of Polylactide with Different D‚ÄźLactide Content in the Presence of Dissolved CO2
M Nofar, A Ameli, CB Park
Macromolecular Materials and Engineering 299 (10), 1232-1239 , 2014
16 2014
Innovative energy storage and electromagnetic interference shielding devices using multiwalled carbon nanotube composite foam
A Ameli, S Wang, Y Kazemi, K Yu, CB Park
FOAMS 2014, Iselin, NJ , 2014
  2014
Nano-cellular foam of nanofibrillar structured polypropylene
M Saniei, N Hossieny, A Ameli, CB Park
FOAMS 2014, Iselin, NJ , 2014
  2014
The interfacial tension of molten polylactide in supercritical carbon dioxide
SH Mahmood, A Ameli, N Hossieny, CB Park
The Journal of Chemical Thermodynamics 75, 69-76 , 2014
9 2014
Innovative energy storage and electro-magnetic interference shielding devices using multiwalled carbon nanotube composite foam
A Ameli, S Wang, Y Kazemi, CB Park
2014 Canada-Korea Conference, Niagara Falls, Canada , 2014
  2014
Multiwalled carbon nanotube composite foam for electro-magnetic and energy-storage applications
A Ameli, S Wang, Y Kazemi, CB Park
2014 Europe-Korea Conference, Vienna, Austria , 2014
  2014
Lightweight polypropylene/stainless-steel fiber composite foams with low percolation for efficient electromagnetic interference shielding
A Ameli, M Nofar, S Wang, CB Park
ACS applied materials & interfaces 6 (14), 11091-11100 , 2014
47 2014
Nanocellular polypropylene made using one-step foaming under supercritical CO2
M Saniei, A Ameli, CB Park
30th International Conference of Polymer Processing Society (PPS-30 ... , 2014
  2014
Processing and property relationships in solid and foamed polymer-CNT nanocomposites
A Ameli, CB Park, P Pötschke
Canadian Society of Mechanical Engineering (CSME) International Congress ... , 2014
  2014
Polypropylene/carbon nanotube nano/microcellular structures with high dielectric permittivity, low dielectric loss, and low percolation threshold
A Ameli, M Nofar, CB Park, P Pötschke, G Rizvi
Carbon 71, 206-217 , 2014
101 2014
Back Matter for Volume 1593
V Altstädt, JH Keller, A Fathi
AIP Conference Proceedings 1593 (1), backmatter , 2014
  2014
Processing and characterization of expanded thermoplastic polyurethane bead foams
N Hossieny, A Ameli, CB Park
16th Blowing Agents and Foaming Processes, Vienna, Austria , 2014
  2014
An innovative method to increase the charge storage capability of polymer nanocomposites
A Ameli, N Hossieny, D Jahani, CB Park, P Pötschke
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2014 ... , 2014
  2014
A new visualization mold design for foam injection molding
V Shaayegan, A Tabatabaei, LH Mark, A Ameli, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2014 ... , 2014
  2014
One-step nanocellular foaming of clarified polypropylene using supercritical CO2
M Saniei, A Ameli, N Hossieny, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2014 ... , 2014
  2014
Utilizing the sound absorption of polymer based open-cell materials for low frequencies by considering air gaps
D Jahani, A Ameli, RKM Chu, CB Park, H Naguib
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2014 ... , 2014
  2014
Gas-assist injection molding of PLA for foaming applications
LH Mark, R Chu, A Ameli, D Jahani, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2014 ... , 2014
  2014
Lightweight polypropylene-carbon nanotube foams with low filler content, high permittivity and low dielectric loss for charge storage applications
A Ameli, D Jahani, M Nofar, CB Park, P Pötschke, G Rizvi
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2014 ... , 2014
  2014
Effect of dissolved CO2 on the crystallization behavior of hard segments for expanded thermoplastic polyurethane bead foam manufacturing
N Hossieny, A Ameli, M Saniei, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2014 ... , 2014
  2014
A study on the acoustic behavior of the foamed micro perforated panel/air-gap system: experiments and modeling
D Jahani, A Ameli, CB Park, H Naguib
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2014 ... , 2014
  2014
Open-cell cavity-integrated injection-molded acoustic polypropylene foams
D Jahani, A Ameli, PU Jung, MR Barzegari, CB Park, H Naguib
Materials & Design 53, 20-28 , 2014
27 2014
Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties
A Ameli, D Jahani, M Nofar, PU Jung, CB Park
Composites Science and Technology 90, 88-95 , 2014
42 2014
Manufacturing of Low-Density Expanded PLA Foams with Superior Intra-Bead Sintering Behaviors
M Nofar, A Ameli, CB Park
Ningbo Forum of Materials Science, Ningbo, China , 2013
  2013
Comparison of melting and crystallization behaviors of polylactide under high-pressure CO 2, N 2, and He
M Nofar, A Tabatabaei, A Ameli, CB Park
Polymer 54 (23), 6471-6478 , 2013
31 2013
Crack growth rate and crack path in adhesively bonded joints: Comparison of creep, fatigue and fracture
G Jhin, S Azari, A Ameli, NV Datla, M Papini, JK Spelt
International Journal of Adhesion and Adhesives 46, 74-84 , 2013
6 2013
Nanocellular foams of polypropylene-multiwalled carbon nanotube composites
A Ameli, N Hossieny, M Nofar, CB Park, P Pötschke
Society of Plastic Engineers (SPE) FOAMS¬ģ , 2013
  2013
Electrical properties and electromagnetic interference shielding effectiveness of polypropylene/carbon fiber composite foams
A Ameli, PU Jung, CB Park
Carbon 60, 379-391 , 2013
127 2013
Thermal and foaming properties of injection-molded high void fraction polylactide composite foams
A Ameli, M Nofar, D Jahani, CB Park
4th International Conference on Biofoams, Toronto, Canada , 2013
  2013
Thermal and foaming properties of injection-molded high void fraction polylactide composite foams
A Ameli, M Nofar, D Jahani, CB Park
4th International Conference on Biofoams, Toronto, Canada , 2013
  2013
Solid-state batch foaming and structure of sub-micron and nanocellular polylactide foams
M Saniei, N Hosseiny, A Ameli, CB Park
Biofoams, Toronto, Canada , 2013
  2013
Analysis and design of adhesively bonded joints for fatigue and fracture loading: a fracture-mechanics approach
S Azari, A Ameli, M Papini, JK Spelt
Journal of Adhesion Science and Technology 27 (15), 1681-1711 , 2013
1 2013
Synthesis, electrical conductivity, and mechanical properties of nano/microcellular polypropylene/CNT nanocomposites
A Ameli, CB Park, P Pötschke, G Rizvi, M Huneault
29th International Conference of Polymer Processing Society (PPS-29 ... , 2013
  2013
Processing and characterization of solid and foamed injection-molded polylactide with talc
A Ameli, D Jahani, M Nofar, PU Jung, CB Park
Journal of Cellular Plastics 49 (4), 351-374 , 2013
33 2013
Characterization of expanded polypropylene bead foams with modified steam-chest molding
N Hossieny, A Ameli, CB Park
Industrial & Engineering Chemistry Research 52 (24), 8236-8247 , 2013
7 2013
Adherend thickness influence on fatigue behavior and fatigue failure prediction of adhesively bonded joints
S Azari, A Ameli, M Papini, JK Spelt
Composites Part A: Applied Science and Manufacturing 48, 181-191 , 2013
10 2013
Characterization and prediction of fracture properties in hygrothermally degraded adhesive joints: an open-faced approach
A Ameli, S Azari, M Papini, JK Spelt
Journal of Adhesion Science and Technology 27 (10), 1080-1103 , 2013
3 2013
Solid-state batch processing and structure of nanocellular thermoplastic polyurethane foams
M Saniei, N Hosseiny, A Ameli, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2013 ... , 2013
2 2013
Electrical properties of polypropylene composite foams reinforced with long stainless steel fibers
A Ameli, M Saniei, D Jahani, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2013 ... , 2013
  2013
Effect of hot air on surface and mechanical properties of EPP products molded in steam chest molding machine
N Hossieny, A Ameli, CB Park
Society of Plastics Engineering Annual Technical Conference, ANTEC 2013 ... , 2013
  2013
Cavity-integrated injection molded acoustic foams
D Jahani, PU Jung, A Ameli, H Naguib, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2013 ... , 2013
  2013
Low percolation threshold and improved electromagnetic interference shielding effectiveness of polypropylene/carbon fiber composites through foaming
A Ameli, PU Jung, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2013 ... , 2013
  2013
Injection foam molding of highly expanded polycarbonate with open-cell structure using mold opening
D Jahani, A Ameli, A Cofreros, H Naguib, CB Park
Society of Plastics Engineering Annual Technical Conference, SPE-ANTEC 2013 ... , 2013
  2013
Through-plane electrical conductivity of injection-molded polypropylene/carbon-fiber composite foams
A Ameli, PU Jung, CB Park
Composites Science and Technology 76, 37-44 , 2013
39 2013
Electrical conductivity and electromagnetic interference shielding effectiveness of injection-molded polypropylene/carbon fiber composite foams
A Ameli, PU Jung, CB Park
28th Int. Conference of Polymer Processing Society (PPS-28), Pattaya, Thailand , 2012
  2012
Effects of process variables on through-plane electrical conductivity of injection-molded polypropylene/carbon fiber composite foams
A Ameli, PU Jung, CB Park
FOAMS¬ģ Conference, Barcelona, Spain , 2012
  2012
Flexural strength and thermal conductivity characteristics of injection molded microcellular PLA composites with high void fraction
A Ameli, A Abbaszadegan, D Jahani, CB Park
Canadian Society of Mechanical Engineers (CSME) International Congress ... , 2012
  2012
Microcellular injection molding of polylactide composites for thermal insulation applications
A Ameli, D Jahani, A A., CB Park
Polymer Processing Society Americas Conference 2012, Niagara Falls, Canada , 2012
  2012
Study on modified steam chest molding process for expanded polypropylene bead foam molding
N Hossieny, A A., CB Park
Polymer Processing Society Americas Conference 2012, Niagara Falls, Canada , 2012
  2012
Effect of processing parameters of foam injection molding technology on the weld-line surface quality
PU Jung, A Ameli, CB Park
Polymer Processing Society Americas Conference 2012, Niagara Falls, Canada , 2012
  2012
Effects of talc and compounding on morphology and mechanical properties of low-pressure injection-molded structural polylactide foams
A Ameli, D Jahani, PU Jung, CB Park
14th Int. Conference of Blowing Agents and Foaming Processes, Berlin, Germany , 2012
  2012
The influences of processing temperatures and nucleating agent in foaming of a thin-walled injection molded part
D. Jahani, P.U. Jung, A. Ameli, M. Saniei, C.B
70th Annual Technical Conference - ANTEC, Conference Proceedings, 2437-2443 , 2012
  2012
Microcellular injection molding of polylactide with talc
A. Ameli, D. Jahani, P.U. Jung, C.B. Park
70th Annual Technical Conference - ANTEC, Conference Proceedings, 1551-1555 ... , 2012
  2012
Effect of substrate modulus on the fatigue behavior of adhesively bonded joints
S Azari, A Ameli, NV Datla, M Papini, JK Spelt
Materials Science and Engineering: A 534, 594-602 , 2012
15 2012
Prediction of environmental degradation of closed adhesive joints using data from open-faced specimens
A Ameli, NV Datla, S Azari, M Papini, JK Spelt
Composite Structures 94 (2), 779-786 , 2012
10 2012
Effects of hygrothermal aging on the fatigue behavior of two toughened epoxy adhesives
NV Datla, A Ameli, S Azari, M Papini, JK Spelt
Engineering Fracture Mechanics 79, 61-77 , 2012
15 2012
journal homepage: www. elsevier. com/locate/msea
M Abbasi, M Abolghasemzadeh, DG Ahn, Y Alizadeh, AS Aloraier, ...
Materials Science and Engineering A 534, 724-726 , 2012
  2012
Quasi‚ÄźStatic Fracture Tests
RA Pearson, BRK Blackman, RDSG Campilho, MFSF de Moura, ...
Testing Adhesive Joints, Best Practices, 163-271 , 2012
3 2012
Evolution of crack path and fracture surface with degradation in rubber-toughened epoxy adhesive joints: Application to open-faced specimens
A Ameli, M Papini, JK Spelt
International Journal of Adhesion and Adhesives 31 (6), 530-540 , 2011
18 2011

Use scroll bar in box above to view more titles.

Links:

School of Mechanical and Materials Engineering, PO Box 642920, Washington State University, Pullman WA 99164-2920, 509-335-8654, Contact Us