Publications
Top
Journal Papers
1. Kakoli Das, B. Vamsi Krishna, Amit Bandyopadhyay and Susmita Bose, "Surface modification of laser-processed porous titanium for load-bearing implants", Scripta Materialia 59 (2008), pp. 822-825
2. Mangal Roy, B. Vamsi Krishna, Amit Bandyopadhyay and Susmita Bose, “Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants,” Acta Biomaterialia, 4 [2], pp. 324-333 (2008).
3. Weichang Xue, Kelly Dahlquist, Ashis Banerjee, A. Bandyopadhyay and S. Bose, “Synthesis and characterization of tricalcium phosphate with Zn and Mg based dopants,” Journal of Materials Science – Materials in Medicine, 19 [7], pp. 2669-2677 (2008).
4. Kakoli Das, Susmita Bose and Amit Bandyopadhyay, “TiO2 Nanotubes on Ti: Influence of Nanoscale Morphology on Bone-Cell Materials Interaction,” Journal of Biomedical Materials Research Part A, DOI: 10.1002/jbm.a.32088 (2008).
5. B. Vamsi Krishna, Weichang Xue, Susmita Bose and Amit Bandyopadhyay, “Engineered Porous Metals for Implants,” JOM, 60 [5], pp. 45-49 (2008).
6. Amit Bandyopadhyay, B. Vamsi Krishna, Weichang Xue and Susmita Bose, Load Bearing Implants Using Laser Engineered Net Shaping (LENS), in press, Journal of Materials Science - Materials in Medicine, DOI 10.1007/s10856-008-3478-2 (2008).
7. Zachary Seeley, Amit Bandyopadhyay, and Susmita Bose, “Tricalcium Phosphate Based Resorbable Ceramics: Influence of NaF and CaO Addition,” Materials Science and Engineering C, 28 [1], pp. 11-17 (2008).
8. S. Iyer, J. McIntosh, A. Bandyopadhyay, N. Langrana, A. Safari, S. C. Danforth, R. B. Clancy, C. Gasdaska, P. J. Whalen, “Microstructural Characterization and Mechanical Properties of Si3N4 Formed by Fused Deposition of Ceramics,” International Journal of Applied Ceramic Technology, 5 [2], pp 127-37 (2008).
9. B. Vamsi Krishna, Weichang Xue, Susmita Bose and Amit Bandyopadhyay, “Functionally graded Co–Cr–Mo coating on Ti–6Al–4V alloy structures,” Acta Biomaterialia, 4 [3], pp. 697-706 (2008).
10. F. Baldwin, N. V. Ravi Kumar, K. Das, Y. M. Gupta and A. Bandyopadhyay, “Effect of hafnium incorporation on the crystallization and mechanical behavior of a Zr-based bulk amorphous alloy,” Materials Science & Engineering A, 477, pp. 233-242 (2008).
11. B. Vamsi Krishna, Susmita Bose and Amit Bandyopadhyay, “Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping,” International Journal of Applied Ceramic Technology, 5 [3], pp 234-42 (2008).
12. Susmita Bose, Mangal Roy, Kakoli Das and Amit Bandyopadhyay, "Surface Modification of Titanium for Load Bearing Applications," in press, Journal of Materials Science – Materials in Medicine, DOI 10.1007/s10856-008-3418-1 (2008) (Available online).
13. Kakoli Das, Amit Bandyopadhyay and Susmita Bose, “Biocompatibility and In Situ Growth of TiO2 Nanotubes on Ti Using Different Electrolyte Chemistry,” Journal of the American Ceramics Society, DOI: 10.1111/j.1551-2916.2008.02545.x (2008).
14. H S Choi, J L Ding, A Bandyopadhyay, M J Anderson and S Bose, “Characterization and modeling of a piezoelectric micromachined ultrasonic transducer with a very large length/width aspect ratio,” J. Micromech. Microeng. 18 (2008) 025037 (13pp) doi:10.1088/0960-1317/18/2/025037.
15. Kakoli Das, Susmita Bose and Amit Bandyopadhyay, Balu Karandikar and Bruce L Gibbins, “Influence of silver on antibacterial activities of surface modified Ti,” Journal of Biomedical Materials Research Part B, DOI: 10.1002/jbm.b.31125 (2008) (Available online).
16. B. Vamsi Krishna, Susmita Bose and Amit Bandyopadhyay, Laser Processing of Low Modulus Porous NiTi Shape Memory Alloy, Journal of Biomedical Materials Research Part B, accepted, July 2008.
17. B. Vamsi Krishna, Amit Bandyopadhyay, “Surface Modification of AISI 410 Stainless Steel Using Laser Engineered Net Shaping (LENSTM)” in press, Journal of Materials & Design, doi:10.1016/j.matdes.2008.08.003 (2008).
18. Abhijit Chanda, Sudip Dasgupta, Susmita Bose and Amit Bandyopadhyay, “Microwave sintering of pure and doped calcium phosphate ceramics,” accepted for publication to Materials Science and Engineering C, August 2008.
19. Mangal Roy, Amit Bandyopadhyay and Susmita Bose, “Laser surface modification of electrophoretically deposited hydroxyapatite coating on Titanium,” in press, Journal of the American Ceramics Society, DOI: 10.1111/j.1551-2916.2008.02698.x (2008).
Conference Proceedings
1. Sudip Dasgupta, Amit Bandyopadhyay and Susmita Bose, “CALCIUM PHOSPHATE NANOCARRIER IN BSA DELIVERY,” accepted for publication to the proceedings of the 32nd International Conference & Exposition on Advanced Ceramics & Composites, American Ceramic Society, Daytona Beach, FL, January 27 – February 2, 2008.
2. Kakoli Das, Susmita Bose and Amit Bandyopadhyay, “"Nanoscale Surface Modification to Improve Bone Cell Materials interactions: TiO2 on Ti," accepted for publication to the proceedings of the 32nd International Conference & Exposition on Advanced Ceramics & Composites, American Ceramic Society, Daytona Beach, FL, January 27 – February 2, 2008.
Top
Journal Papers
1. A. Bandyopadhyay, E. A Withey, J. Moore and S. Bose, “Influence of ZnO doping in calcium phosphate ceramics,” Materials Science and Engineering C, 27 [1], pp. 14-17 (2007).
2. W. Xue, H. L. Hosick, A. Bandyopadhyay, S. Bose, C. Ding, K DK Luk, K MC Cheung, W W Lu, “Preparation and cell-materials interactions of plasma sprayed strontium-containing hydroxyapatite coating,” Surface and Coatings Technology, Volume 201 [8], pp. 4685-93 (2007).
3. Young Jin Choi, Zachary Seeley, Amit Bandyopadhyay, Sheikh A. Akbar and Susmita Bose, “Aluminum Doped TiO2 Nano-Powders for Gas Sensors,” Sensors and Actuators B, Volume 124, Issue 1, pp. 111-117 (2007).
4. K. Das, S. Bose and A. Bandyopadhyay, “Surface Modifications and Cell-Materials Interactions with Anodized Ti,” Acta Biomaterialia, 3, pp. 573-585 (2007). (Kakoli Das received the Annual Acta Biomaterialia Award for this article)
5. B. Vamsi Krishna, S. Bose and A. Bandyopadhyay, “Strength of open cell 6101 aluminum foams under free and constrained compression" Materials Science and Engineering A, 452-453, pp. 178-188 (2007).
6. R. Condie, S. Bose and A. Bandyopadhyay, “Bone Cell-Materials Interaction on Si Microchannels with Bioinert Coatings" Acta Biomaterialia, 3, pp.523-530 (2007).
7. G. A. Crawford, N. Chawla, K. Das, S. Bose, and A. Bandyopadhyay, “Microstructure and Deformation Behavior of Bioactive TiO2 Coatings,” Acta Biomaterialia, Volume 3, Issue 3, pp. 359-367 (2007).
8. B. Vamsi Krishna, S. Bose and A. Bandyopadhyay, “Laser Processing of Net-Shape NiTi Shape Memory Alloy,” Metallurgical and Materials Transactions A, 38A, pp. 1096-1103 (2007).
9. P. P. Bandyopadhyay, B. Vamsi Krishna, S. Bose and A. Bandyopadhyay, "Compositionally Graded Aluminum Oxide Coating on Stainless Steel Using Laser Processing," Journal of the American Ceramic Society, 90 [7], p 1989 (2007).
10. Hongsoo Choi, Jow-Lian Ding, Amit Bandyopadhyay, Susmita Bose, "Finite element analysis of piezoelectric thin film structures," IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 54 [10], pp. 2036-44 (2007).
11. B. Vamsi Krishna, S. Bose and A. Bandyopadhyay, “Low Stiffness Porous Ti Structures for Load Bearing Implants,” Acta Biomaterialia, 3 [6], pp. 997-1006 (2007).
12. Weichang Xue, B. Vamsi Krishna, A. Bandyopadhyay and S. Bose, “Processing and biocompatibility evaluation of laser processed porous titanium,” Acta Biomaterialia, 3 [6], pp. 1007-1018 (2007).May 2007.
13. Hongsoo Choi, Abhishek Dalakoti, Susmita Bose and Amit Bandyopadhyay, “Influence of Top Electrode Design on pMUTs Performance,” Sensors and Actuators A, Volume 135, Issue 2, pp. 613-619 (2007).
14. Vamsi Krishna Balla, Partha P Bandyopadhyay, Susmita Bose and Amit Bandyopadhyay, "Compositionally Graded Yttria Stabilized Zirconia Coating on Stainless Steel Using Laser Engineered Net Shaping (LENSÔ)," Scripta Materialia, 57 [9], pp. 861-64 (2007).
15. Ashis Banerjee, Amit Bandyopadhyay and Susmita Bose, "Hydroxyapatite nanopowders: Synthesis, densification and cell–materials interaction," Materials Science and Engineering: C, 27 [4], pp. 729-735 (2007).
16. Zachary Seeley, Amit Bandyopadhyay and Susmita Bose, “Influence of TiO2 and Ag2O Addition on Mechanical Properties of Tricalcium Phosphate,” in press, Journal of Biomedical Materials Research: Part A, 82A [1], pp. 113-121 (2007).
Conference Proceedings
1. B. Vamsi Krishna and Amit Bandyopadhyay, Al-Cu Joining: Influence of Various Surface Treatments Al by Laser, in General Poster Session, Proceedings of the TMS2007, 136th Annual Meeting & Exhibition, Feb 25 – Mar 1, 2007, Orlando, Florida, USA.
Top
Handbook Chapter
1. Amit Bandyopadhyay and Susmita Bose, “Materials and Design of Orthopedic Devices,” Encyclopedia of Medical Devices and Instrumentation, 2nd Edition, Edited by John G. Webster, John Wiley & Sons, pp. 187-192 (2006).
Journal Papers
1. Amit Bandyopadhyay, Sheldon Bernard, Weichang Xue and Susmita Bose, “Feature Article: Calcium Phosphate Based Resorbable Ceramics: Influence of MgO, ZnO and SiO2 Dopants,” Journal of the American Ceramic Society, 89 [9], pp. 2675-88 (2006).
2. K. Das, Y. M. Gupta and A. Bandyopadhyay, “Influence of inert filler for synthesis of titanium silicides (Ti5Si3) under shock loading,” Materials Science and Engineering A, 426 [1-2], pp. 147-56 (2006).
3. W. Xue, J. Moore, H. L. Hosick, S. Bose, A. Bandyopadhyay, W. W. Lu, K. Cheung and K. Luk “Osteoprecursor cell response to strontium-containing hydroxyapatite ceramics,” Journal of Biomedical Materials Research: Part A,.79A [4], pp. 804-14 (2006).
4. A. Banerjee, A. Bandyopadhyay and S. Bose, “Influence of La2O3, SrO and ZnO Addition on PZT” Journal of the American Ceramic Society, 89 [5], pp. 1594-1600 (2006).
5. A. Bandyopadhyay, Kakoli Das, Jeff Marusich and Seyi Onagoruwa, “Application of Fused Deposition in Controlled Microstructure Metal-Ceramic Composites,” Rapid Prototyping Journal, 12 [3], pp. 121-28 (2006). (Outstanding paper of the year award from the Rapid Prototyping Journal)
6. A. Dalakoti, A. Bandyopadhyay and S. Bose, “Effect of Zn, Sr and Y addition on electrical properties of PZT thin films,” Journal of the American Ceramic Society, 89 [3], pp. 1140-43 (2006).
Conference Proceedings
1. K. Das, S. Bose, and A. Bandyopadhyay, “Titania Nanotubes on Ti: Surface Modification for Metal Implants,” Proceedings of the 4th International Symposium on Nano Manufacturing, MIT Press, MIT, MA, 2006. (Outstanding Paper Award)
2. S. Bose, A. Banerjee2 and A. Bandyopadhyay, “Nanoscale Hydroxyapatite For Bone Implants,” Proceedings of the 4th International Symposium on Nano Manufacturing, MIT Press, MIT, MA, 2006.
3. S. Bose, S. Dasgupta, W. Xue, and A. Bandopadhayay, “Tricalcium Phosphate Nanoparticles: Osteoblast Response and A Novel Drug Carrier,” Proceedings of the 4th International Symposium on Nano Manufacturing, MIT Press, MIT, MA, 2006. (Outstanding Paper Award)
Journal Papers
1. G .J. Cheng, D. Pirzada, M. Cai, P. Mohanty, A. Bandyopadhyay, "Bioceramic Coating of Hydroxyapatite on Metallic substrate with Nd:YAG laser", Materials Science and Engineering C, 25 [4], pp. 541-547 (2005).
2. D. Rokusek, C. Davitt, A. Bandyopadhyay, S. Bose and H. L. Hosick, “Interaction of human osteoblasts with bioinert and bioactive ceramic substrates,” Journal of Biomedical Materials Research, Volume 75A [3], pp. 588-594 (2005).
3. K. Das, A. Bandyopadhyay and Y. M. Gupta, “Effect of Crystallization on the Mechanical Properties of Zr 56.7 Cu15.3Ni12.5Nb5.0Al10.0Y0.5 Bulk Amorphous Alloy,” Materials Science and Engineering A, 394 [1-2], pp. 302-311 (2005).
4. F. Akasheh, J. D. Fraser, S. Bose and A. Bandyopadhyay, “Piezoelectric Micromachined Ultrasonic Transducers (pMUTs): Modeling the Influence of Structural Parameters on Device Performance,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 52 [3], pp. 455-68 (2005).
5. O. Huang, A. Bandyopadhyay and S. Bose, “Influence of Processing Parameters on PZT Thick Films,” Materials Science and Engineering B, 116 [1], pp. 19-24 (2005).
6. Y. Wu and S. Bose, “Nanocrystalline Hydroxyapatite: Micelle Templated Synthesis and Characterization”, Langmuir, 21, 3232-3234, 2005.
7. S. Bose and Y. Wu, “Synthesis of Al2O3-CeO2 Mixed Oxide nano-powders”, Journal of the American Ceramic Society, 88[7] 1999-2002, 2005.
Conference Proceeding
1. Y-J Choi, A. Bandyopadhyay and S. Bose, MRS Proceedings, fall 2005, Boston, MA, 2005.
Journal Papers
1. S. J. Kalita, D. Rokusek, S. Bose, H. L. Hosick and A. Bandyopadhyay, "Effects of MgO-CaO-P2O5-Na2O-based additives on mechanical and biological properties of hydroxyapatite," Journal of Biomedical Materials Research, 71A [1], pp.35-44 (2004).
2. Yujie Wu, Amit Bandyopadhyay and Susmita Bose, “Processing of Alumina and Zirconia Nano-powders and Compacts,” Materials Science and Engineering A, 380 [1-2], pp.349-55 (2004).
3. Ashwin Hattiangadi and Amit Bandyopadhyay, “Effects of Designed Tubular Porosity on Compressive Strengths of Honeycomb Ceramics,” Journal of Materials Science, 39 (14): 4575-4586 (2004).
4. Firas Akasheh, Todd Myers, John D. Fraser, Susmita Bose and Amit Bandyopadhyay, “Development of piezoelectric micromachined ultrasonic transducer,” Sensors and Actuators A, 111 [2-3], pp.275-287 (2004).
5. Raji Soundararajan, Rabindra Nath Das, Russ Tjossem, Amit Bandyopadhyay and Kelvin G. Lynn, Elgin E. Eisser, Jerry Lazaroff, “Growth and Characterization of Single Crystal PMN-PT via High Pressure Vertical Bridgman (HPVB) Method,” Journal of Materials Research, 19 [2], pp. 609-15 (2004).
6. S. J. Kalita, S. Bose, H. L. Hosick and A. Bandyopadhyay, “CaO-P2O5-Na2O based sintering additives for hydroxyapatite (HAp) ceramics,” Biomaterials, 25, pp. 2331-2339 (2004).
7. A. Banerjee and S. Bose, “Free-standing lead zirconate titanate Nanoparticles: Low temperature synthesis and densification”, Chem. Mater., Volume 16, (26), pp 5610-5615, 2004.
8. S. Bose and A. Banerjee, "Novel Synthesis Route to Make Nanocrystalline Lead Zirconate Titanate Powder", Journal of the American Ceramic Society, 87[3] 487-89, 2004.
Conference Proceedings
1. Y. J. Choi, A. Banerjee, A. Bandyopadhyay and S. Bose, "Synthesis of Nb and La doped TiO2 for gas sensors" Ceramic Transaction (CT), Proceedings of American Ceramic Society, July 2004.
2. A. Banerjee, A. Bandyopadhyay and S. Bose, "Effect of ZnO Doping in PZT Nanopowders," Accepted for publication in Ceramic Transactions (CT) Volume 159 "Ceramic Nanomaterials and Nanotechnology III", American Ceramic Society, July 2004.
3. A Banerjee and S. Bose, “Effect of Synthesis Parameters on Nanocrystalline PZT Powder,” Accepted for publication in Ceramic Transactions (CT) Volume 167, In symposium on “Developments in Dielectric Materials and Electronic Devices”, pp 31-39, 2004.
4. A. Banerjee and S. Bose, “Effect of Dopants on The Properties of Nanocrystalline Hydroxyapatite,” Accepted for publication in Ceramic Transaction (CT) Volume 164, In symposium on “Bioceramics: Materials and Applications V”, pp 91-99, 2004.
Journal Papers
1. S. J. Kalita, S. Bose, H. L. Hosick and A. Bandyopadhyay, “Development of controlled porosity polymer-ceramic scaffolds via FDM,” Materials Science and Engineering C, 23 [5], pp.611-620 (2003).
2. T. B. Myers, S. Bose, J. D. Fraser and A. Bandyopadhyay, "Micro-Machining Of PZT-Based MEMS," Ceramic Bulletin, 18 [1] (2003).
3. Jens Darsell, Susmita Bose, Howard Hosick and Amit Bandyopadhyay, “From CT Scans to Ceramic Bone Grafts,” Journal of the American Ceramic Society, 86 [7], pp. 1076-80 (2003).
4. Bose S., Darsell J., Kintner M., Hosick, H. and Bandyopadhyay A., "Pore Size and Pore Volume Effects on Calcium Phosphate Based Ceramics," Materials Science and Engineering C, 23, pp. 479-86 (2003).
5. S. Bose and S. K. Saha, "Synthesis and characterization of hydroxyapatite nanopowders by emulsion technique", Chem. Mater., 15 (23), 4464-4469, 2003.
6. S. Bose and S. K. Saha, “Synthesis of hydroxyapatite nanopowder using sucrose templated sol-gel method” Journal of the American Ceramic Society, 86 [6], pp. 1055-57, 2003.
Conference Proceedings
1. Samar J. Kalita, Susmita Bose, Howard L. Hosick and Amit Bandyopadhyay, “Oxide based Sintering Additives for HAp Ceramics,” Bioceramics: Materials and Applications IV, American Ceramic Society, pp. 63-72 (2003).
2. K. Das, A. Bandyopadhyay and Y.M. Gupta, “Shock Wave Synthesis of Titanium Silicide (Ti5Si3) Part I: Effects of Impact Velocity, Milling Time and Compact Density,” proceedings of the Shock Compression of Condensed Matter-2003, accepted for publication, August 2003.
3. A. Bandyopadhyay, K. Das and Y. M. Gupta, “Shock Wave Synthesis of Titanium Silicide (Ti5Si3) Part II: Effect of Ceramic Fillers” proceedings of the Shock Compression of Condensed Matter-2003, accepted for publication, August 2003.
Journal Papers
1. S. J. Kalita, S. Bose, H. L. Hosick and A. Bandyopadhyay, “Porous Calcium Aluminate Ceramics For Bone-Graft Applications,” Journal of Materials Research, 17 [12], 3042-49 (2002).
2. Todd Myers, Parag Banerjee, Susmita Bose and Amit Bandyopadhyay, “Layered PZT and PLZT Ceramic Thin Films,” Journal of Materials Research, 17, 2379-86, (2002).
3. S. Bose, J. Darsell, L. Yang, D. K. Sarkar, H. L. Hosick and A. Bandyopadhyay, “Processing and Characterization of Porous Alumina Scaffolds,” Journal of Materials Science: Materials in Medicine, 13, pp. 23-28 (2002).
Conference Proceedings
1. S. J. Kalita, J. Finley, S. Bose, H. L. Hosick and A. Bandyopadhyay, “Development of Porous Polymer-Ceramic Composites as Bone Grafts,” accepted for publications to the MRS Symposium Proceedings, Spring Meeting, San Francisco, 2002.
2. S. J. Kalita, J. Finley, H.L. Hosick, S. Bose and A. Bandyopadhyay, “Development of Porous Polymer-Ceramic Composites as Bone Grafts,” accepted for publication to the MRS Spring 2002 symposium proceedings, Volume 726, May 2002.
3. F. Akasheh, T. Myers, S. Bose and A. Bandyopadhyay, “Optimization of PZT-based MEMS,” accepted for publication to the MRS Spring 2002 symposium proceedings, May 2002.
4. G. Kuhn, T. Myers, S. Bose and A. Bandyopadhyay, “Mechanical Properties of Boron Doped Si and Si/SiO2 Membranes,” accepted for publication to the MRS Spring 2002 symposium proceedings, May 2002.
5. S. J. Kalita, S. Bose, H. L. Hosick, S. A. Martinez and A. Bandyopadhyay, “Calcium Carbonate Reinforced Natural Polymer Composite For Bone Grafts,” accepted for publication to the MRS Spring 2002 symposium proceedings, Volume 724, May 2002.
Book
1. “Innovative Processing and Synthesis of Ceramics, Glasses and Composites V” Ceramic Transactions 129, Edited by J. P. Singh, N. P. Bansal and A. Bandyopadhyay, American Ceramic Society, 2001.
Handbook Chapter
1. D. Bourell, D. Klosterman, I. Gibson, A. Bandyopadhyay and J. Beaman, "Rapid Prototyping," ASM Handbook, Volume 1: Composites, 2nd Edition, 2001.
Journal Papers
1. Seyi Onagoruwa, William Donigan, Susmita Bose and Amit Bandyopadhyay, “Fused Deposition of Silica Ceramics and Composites,” P/M Science and Technology Briefs, 3 [5], pp. 9-12 (2001).
2. R. N. Das, A. Bandyopadhyay and S. Bose, “Nanocrystalline ?-Al2O3 Using Sucrose,” Journal of the American Ceramic Society, 84 [10], pp. 2421-23 (2001).
3. Raji Soundararajan, Raj Atisivan, Gabe Kuhn, Susmita Bose and Amit Bandyopadhyay, “Processing of Mullite-Al Composites,” Journal of the American Ceramic Society, 84 [3], pp. 509-13 (2001).
4. Raj Atisivan, Susmita Bose and Amit Bandyopadhyay, “Porous Mullite Preforms via Fused Deposition,”
Journal of the American Ceramic Society, 84 [1], pp. 221-23 (2001).
Conference Proceedings
1. Seyi Onagoruwa, Susmita Bose and Amit Bandyopadhyay, “Fused Deposition of Ceramics and Composites,” proceedings of the 12th SFF Symposium, UT Austin, Austin, TX, 2001.
2. R. Atisivan, A. Bandyopadhyay and Y. M. Gupta, “Dynamic tensile Response of Alumina-Al Composites,” proceedings of the Shock Compression of Condensed Matter-2001, accepted for publication, August 2001.
3. O. Huang, A. Bandyopadhyay and S. Bose, "Processing Of PZT And PLZT Thick Films," in “Innovative Processing and Synthesis of Ceramics, Glasses and Composites V” Ceramic Transactions 129, Edited by J. P. Singh, N. P. Bansal and A. Bandyopadhyay, American Ceramic Society, 2001.
4. T. B. Myers, S. Bose, J. D. Fraser and A. Bandyopadhyay, " Micro-Machining Of PZT-Based MEMS," in “Innovative Processing and Synthesis of Ceramics, Glasses and Composites V” Ceramic Transactions 129, Edited by J. P. Singh, N. P. Bansal and A. Bandyopadhyay, American Ceramic Society, 2001.
5. R. Atisivan, J. Marusich, S. Onagoruwa and A. Bandyopadhyay, "Novel Ceramic-Ceramic Composites via Fused Deposition," in Advances in Ceramic Matrix Composites VII, Ceramic Transactions 128, Edited by J. P. Singh, N. P. Bansal, American Ceramic Society, pp. 3-13, 2001.
Journal Papers
1. A. Bandyopadhyay, A. Hattiangadi, R. Atisivan and S. Bose, “Processing of Ceramics via RP,” P/M Science and Technology Briefs, 2 [2], pp. 19-21 (2000).
2. Ashwin Hattiangadi and Amit Bandyopadhyay, “Strength Degradation of Porous Ceramics Under Uniaxial Compressive Loading,” Journal of the American Ceramic Society, 83 [11], pp.2730-36 (2000).
3. Jon Christensen and Amit Bandyopadhyay, “Reverse Engineering of Clear Solids using Refractive Index Matching,” Rapid Prototyping Journal, 6 [2], pp.87-96 (2000).
4. A. Bandyopadhyay, S. C. Danforth and A. Safari, “Effects of Processing History on Thermal Debinding,” Journal of Materials Science, 35 [16], pp. 3983-88 (2000).
5. Ashwin Hattiangadi and Amit Bandyopadhyay, “Modeling of Multiple Pore Ceramic Materials Fabricated via Fused Deposition Process,” Scripta Materialia, 42, pp. 581-88 (2000).
Conference Proceedings
1. A. Bandyopadhyay, R. Atisivan, G. Kuhn and S. Yeruva, "Mechanical Properties of Interconnected Phase Alumina-Al Composites," proceedings of the 11th SFF Symposium, UT Austin, Austin, TX, 2000.
2. J. M. Jungk,* B. T. Crozier, A. Bandyopadhyay, N. R. Moody, and D.F. Bahr, “Mechanical Properties And Adhesion Of PZT Thin Films For MEMS,” in Proceedings of the Materials Research Society, Thin Films Stresses and Mechanical Properties VIII, vol. 594, pp. 225-230 (2000).
3. S. Bose, T. Myers, A. Bandyopadhyay and H. L. Hosick, "Polymer-Ceramic Composites for bone Graft Applications," Polymer Preprints, 2000, 41 (2) p. 1620.
4. S. Bose, J. Darsell, K. Feeley, R. Kintner, H. L. Hosick and A. Bandyopadhyay, “Controlled Porosity Ceramics for Bone Graft Applications,” MD-VOL 91, Porous, Cellular and Microcellular Materials-2000, ASME 2000, pp. 1-18 (2000).
5. S. Yeruva, R. Atisivan, S. D. Antolovich and A. Bandyopadhyay, "Modeling and Simulations of Structured Composites," Innovative Processing / Synthesis: Ceramics, Glasses and Composites IV, American Ceramic Society, pp. 587-97 (2000).
Journal Papers
1. Amit Bandyopadhyay, “Functionally Designed 3-3 Mullite-Aluminum Composites,” Advanced Engineering Materials, 1 [3-4], pp. 199-201 (1999).
2. S. Bose, S. Sugiura and A. Bandyopadhyay, “Processing of Controlled Porosity Ceramic Structures via Fused Deposition Process,” Scripta Materialia, 41 [9] 1009-14 (1999).
Conference Proceedings
1. Ashwin Hattiangadi and Amit Bandyopadhyay, “Processing, Characterization and Modeling of Non-Random Porous Ceramic Structures,” proceedings of the Solid Freeform Fabrication Symposium, Volume 1999, Edited by H. L. Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H Crawford, The University of Texas at Austin, Austin, Texas, (1999) pp 319-326.
2. Amit Bandyopadhyay, Raj Atisivan and Susmita Bose, “Novel Ceramics and Metal-Ceramic Composites via Fused Deposition Process,” proceedings of the Solid Freeform Fabrication Symposium, Volume 1999, Edited by H. L. Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H Crawford, The University of Texas at Austin, Austin, Texas, (1999), pp 361-68.
3. S. Bose, J. Darsell, L. Hua, D. Sarkar and A. Bandyopadhyay, “Controlled Porosity Scaffolds via Fused Deposition Process,” Ceramic Transactions 110, Bioceramics: Materials and Applications III, American Ceramic Society, pp. 167-79 (1999).
4. S. Bose, A. Hattiangadi and A. Bandyopadhyay, “Novel Functionally Gradient Al-Alumina and Cu-Alumina Composites,” Ceramic Transactions 104, Innovative Processing and Synthesis of Ceramics, Glasses and Composites, American Ceramic Society, pp. 203-211, (1999).
5. R. Atisivan, A. Hattiangadi, S. Bose and A. Bandyopadhyay, “Novel Mullite-Cu And Mullite-Al 3-3 Composites,” Ceramic Transactions 103, Ceramic Matrix Composites, American Ceramic Society, pp. 92-104 (1999).
6. R. Atisivan, A. Hattiangadi, M. R. Diaz, S. Sugiura, S. Bose and A. Bandyopadhyay, “Functionally Gradient Ceramic Composites via Fused Deposition Process,” proceedings of the Surface Engineering: Science and Technology I: Solid Freeform Fabrication Symposium, TMS Annual Meeting, San Diego, CA, (1999).
Handbook Chapter
1. A. Safari, V. F. Janas and A. Bandyopadhyay, “Piezoelectric Transducers and Sensors,” A CRC Press Handbook on Measurements, Sensors and Instruments, Edited by J. G. Webster, Electrical Engineering Handbook, Vol 14, 1998.
Journal Papers
1. T. F. McNulty, F. Mohammadi, A. Bandyopadhyay, D. J. Shanefield, S. C. Danforth and A. Safari, “Development of Binder Formulation for Fused Deposition of Ceramics,” Rapid Prototyping Journal, 4 [4], pp 144-50 (1998).
2. A. Bandyopadhyay, R. K. Panda, T. F. McNulty, F. Mohammadi, S. C. Danforth and A. Safari, “Piezoelectric Ceramics and Composites via Rapid Prototyping Techniques,” Rapid Prototyping Journal, 4 [1], pp 37-49 (1998).
3. R. A. Moss, S. Bose, K. Ragunathan, N. Jayasuria and T. Emge, “An exceptopnally reactive Phosphotriester”, Tetrahedron Letters., 39, pp.- 347-350, 1998.
Conference Proceedings
1. D. F. Bahr, J. C. Merlino, P. Banerjee, C. M. Yip and A. Bandyopadhyay, “Reliability and Properties of PZT Thin Films for MEMS Applications,” Materials Science for MEMS Devices, MRS Symposium Proceedings, Fall 1998.
2. J. Christensen and A. Bandyopadhyay, “Reverse Engineering of Polymeric Solid Models via Refractive Index Matching (RIM),” proceedings of the Solid Freeform Fabrication Symposium, Volume 1998, Edited by H. L. Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H Crawford, The University of Texas at Austin, Austin, Texas, pp 351-58 (1998).
3. S. Bose, M. Avila and A. Bandyopadhyay, “Processing of Bioceramic Implants via Fused Deposition Process,” proceedings of the Solid Freeform Fabrication Symposium, Volume 1998, Edited by H. L. Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H Crawford, The University of Texas at Austin, Austin, Texas, pp. 629-36 (1998).
4. A. Safari, S. C. Danforth, R. Panda, S. Rangarajan and A. Bandyopadhyay, “Fused Deposition of Functional Advanced Ceramics,” Proceedings of the CEMTEC Conference on Rapid Prototyping, Florence, Italy, (1998).
Review Paper
1. A. Safari, V. F. Janas and A. Bandyopadhyay, “Development of Fine Scale Piezoelectric Composites for Transducers,” A. I. Chem. E Journal, 43 [11A], 2849-56 (1997).
Journal Papers
2. A. Bandyopadhyay, R. K. Panda, V. F. Janas, M. K. Agarwala, S. C. Danforth and A. Safari, “Processing of Piezocomposites by Fused Deposition Technique,” Journal of the American Ceramic Society, 80, 1366-72 (1997).
3. S. W. Quander, A. Bandyopadhyay and P. B. Aswath, “Synthesis and Properties of Silicon Nitride Reinforced BAS Ceramic Matrix Composites,” Journal of Materials Science, 32, 2021-29 (1997).
4. R. A. Moss, S. Bose and K. K. Jespersen, “Phosphate Cleavage by Organoiodinane Oxyanion analogues of o-Iodosobenzoate: Experimental and Computational Studies” J. Phy. Org. Chem., 10, pp. 27-32, 1997.
5. R. A. Moss and S. Bose, “Kinetics of the Micellar Nucleophilic Cleavage of Diastereomeric Phosphotriesters”, Tetrahedron Letters, 38 [6], pp. 965-968, 1997.
Conference Proceedings
1. G. Qi, C. Dai, S. Rangarajan, S. Wu, A. Bandyopadhyay, N. Langarana, A. Safari and S. C. Danforth, “Properties of RU955 Si3N4 Filament for Fused Deposition of Ceramics,” Proceedings of the Solid Freeform Fabrication Symposium, Volume 1997, Edited by H. L.Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H. Crawford, The University of Texas at Austin, Austin, Texas, pp. 421-30 (1997).
2. P. Bharagava, A. Bandyopadhyay, S. Rangarajan, G. Qi, C. Dai, S. Wu, S. C. Danforth and A. Safari, “Shrinkage, Weight Loss and Crack Prevention During Binder Burn Out of Components Produced via Fused Deposition of Ceramics,” Proceedings of the Solid Freeform Fabrication Symposium, Volume 1997, Edited by H. L.Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H. Crawford, The University of Texas at Austin, Austin, Texas, pp. 395-402 (1997).
3. A. Safari, S.C. Danforth, R. K. Panda, T.F. McNulty, F. Mohammadi and A. Bandyopadhyay, “ Processing of Novel Piezoelectric Transducers via SFF,” Proceedings of the SFF Symposium, Volume 1997, Edt by H. L.Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H. Crawford, The UT at Austin, TX, pp. 403-10 (1997).
4. S. Rangarajan, G. Qi, A. Bandyopadhyay, C. Dai, J. W. Han, P. Bharagava, S. Wu, A. Safari and S. C. Danforth, “The Role of Materials Processing Variables in FDC Process,” Proceedings of the Solid Freeform Fabrication Symposium, Volume 1997, Edited by H. L.Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H. Crawford, The University of Texas at Austin, Austin, Texas, pp. 431-40 (1997).
5. A. Safari, S.C. Danforth, R. K. Panda, T.F. McNulty, F. Mohammadi and A. Bandyopadhyay, “Fabrication of Piezoelectric Ceramics and Composites Using Rapid Prototyping Techniques,” Proceedings of the 7th International Conference on Rapid Prototyping, Volume 1997, Edited by R. P. Chartoff, A. J. Lightman, M. K. Agarwala and F. Prinz, University of Dayton and Stanford University, San Francisco, CA, 34-42 (1997).
6. A. Safari, S.C. Danforth, R. K. Panda, T.F. McNulty and A. Bandyopadhyay, “Solid Freeform Fabrication of Novel PZT Ceramic/Polymer Composites,” proceedings of the Eighth US-Japan Meeting on Dielectric and Piezoelectric Ceramics, October 15-18, Plymouth, MA, pp. 307-10 (1997).